A crypto market scanner that watches every coin at once.
Pick one of 16 scan types — momentum, RSI, volume, MACD, liquidations, funding rate and more — set your threshold, and CoinBeacon sweeps every market on the venue you chose, continuously. Matches reach Telegram, Discord, email, or your webhook in seconds.
Free plan · Every scan type included · Google sign-in
Every market on the venue, checked at the same time.
A Momentum scan asks one question of every coin on the exchange you pick, and names the ones that answer yes. Below is that population on Binance USDⓈ-M right now, ranked by its 24h move — the market a scan reads, not a picture of one.
757
markets checked, live
Binance USDⓈ-M · 24h window
ARB/USDT
Binance USDⓈ-M
ARB/USDC
Binance USDⓈ-M
RAYSOL/USDT
Binance USDⓈ-M
COLLECT/USDT
Binance USDⓈ-M
BULLA/USDT
Binance USDⓈ-M
MARSCOIN/USDT
Binance USDⓈ-M
FLOCK/USDT
Binance USDⓈ-M
B/USDT
Binance USDⓈ-M
Drawn, not read · an example scan, with settings you pick
Alert me when any coin moves ↑ 5% within 15 minutes on Binance USDⓈ-M.
Threshold
5%
Window
15 min
Cooldown
30 min
Every coin on the venue is then checked continuously on CoinBeacon's servers, and the ones that cross name themselves in the notification — Telegram, Discord, email or a webhook — with the cooldown pacing how often the scan can fire.
Four fields, no watchlist
How to scan the crypto market without naming a coin.
- 01Pick the scan typeSixteen to choose from — Momentum, Pump/Dump, RSI, Stoch RSI, Volume, Wick, Market Cap, OBV, EMA, MACD, ADX, Bollinger Bands, VWAP, Liquidation, Liquidation Cascade and Funding Rate. The scan type is the question; the market supplies the names.
- 02Choose the market it sweepsA Momentum scan runs on whichever of the 14 supported venues you pick — ten spot markets and four futures markets. The indicator scans read Binance spot or futures candles, and a Funding Rate scan covers every perpetual on one of 8 futures venues. Scope stays All Coins throughout.
- 03Set the threshold, the window and the cooldownMomentum takes a percentage and a rolling window — 5% inside 15 minutes, say. Indicator scans take their own level and a candle interval, usually 1 minute to 4 hours. The cooldown decides how long the scan stays quiet after it fires.
- 04Start the scan and leave it runningIt runs on CoinBeacon's servers, so nothing has to stay open on your side. Matches stream into the live panel as they land, and a notification goes out on Telegram, Discord, email, or a JSON webhook the moment a coin crosses your threshold — with the cooldown pacing how often the scan fires.
What traders point a scan at
Sudden movers, RSI extremes, volume spikes, and funding gone strange.
Scan every coin for sudden moves
A Momentum scan asks one question of every coin on your exchange: did anything move 5% inside the last 15 minutes? The ones that did are named in the message. For a standing watch on a coin you already hold, a momentum alert re-arms after every swing, and the movers board shows what has already run today.
Screen the market for RSI extremes
Rather than clicking through charts hunting for oversold coins, run the RSI scan on the timeframe you trade and let it hand you the list. It reads RSI(14) from closed Binance spot or futures candles, so nothing repaints. The same conditions exist as single-coin indicator alerts once you know which coin you care about. Want the list now rather than as a notification? The crypto screener answers the same RSI question on demand, with 77 other filters beside it.
A crypto volume scanner for unusual activity
The Volume scan flags every coin printing a candle whose volume blows past its recent average on your timeframe — an early sign of unusual activity, and often the first trace of a freshly listed coin you'd never think to search for. Read the batch, pick the name that interests you, then put a dedicated volume alert on it.
Scan funding rates across futures venues
The Funding Rate scan sweeps every perpetual on the venue you pick — one of eight, from Binance and Bybit through to BitMEX — and reports the rates that crossed your threshold or suddenly multiplied, surfacing them as they cross. Funding rate alerts do the same job for a single symbol you're already in.
Market scanner — questions
- How many scan types does the crypto market scanner include?
- Sixteen: Momentum, Pump/Dump, RSI, Stochastic RSI, Volume, Wick, Market Cap, OBV, EMA, MACD, ADX, Bollinger Bands, VWAP, Liquidation, Liquidation Cascade, and Funding Rate. Each one takes your own threshold, timeframe, and per-alert cooldown.
- How many coins and exchanges does the market scanner cover?
- It depends on the scan. A Momentum scan sweeps every coin on whichever of the 14 supported venues you pick — ten spot markets including Binance, Coinbase, Kraken, OKX, KuCoin, Gate.io, MEXC, Bitget and Huobi, plus the Binance, Bybit, OKX and Kraken futures markets. The indicator scans — RSI, Stoch RSI, Volume, Wick, OBV, EMA, MACD, ADX, Bollinger Bands, VWAP and Market Cap — read Binance spot or futures candles, and Funding Rate scans cover perpetuals on 8 futures venues including Binance, Bybit, Bitget and BitMEX. The live board on this page shows how many markets one of those venues carries right now.
- How do I scan the whole crypto market for coins moving right now?
- Run a Momentum scan. Pick the exchange, set a percentage and the rolling window it has to happen inside — 5% within 15 minutes is a common pair of numbers — and choose a direction. From then on every coin on that exchange is checked continuously, and the ones that cross your threshold name themselves in the notification. The scope stays All Coins, so there is no watchlist to build.
- Will a market-wide scan flood me with notifications?
- The per-scan cooldown controls that. Matches stream into the live panel the moment a coin crosses your threshold, and a notification goes out — but once the scan fires it stays quiet for the cooldown you set before it can fire again. Set a longer cooldown, a tighter threshold, or a wider window and it reports less often.
- What's the difference between a market scan and a single-coin alert?
- A single-coin alert watches the one pair you named; a scan asks the same question of every coin at once and reports whichever ones answer yes. That is the point — the coins worth trading are usually the ones you never thought to type in. Under the hood a scan is still an alert: it appears under Active Scans, carries its own cooldown, and counts against the same plan limits.
- Which timeframes can the market scanner run on?
- Most indicator scans offer candle intervals from 1 minute to 4 hours, and they evaluate on closed candles, so a mid-candle spike that retraces never counts as a match. The Momentum scan works from a rolling time window instead — a percentage inside 15 minutes, an hour, or whatever span you choose — rather than a candle interval.
- Can I scan crypto funding rates across exchanges?
- Yes. The Funding Rate scan sweeps every perpetual on the venue you select, from 8 supported futures venues: Binance, Bybit, Bitget, Gate.io, KuCoin, HTX, BingX and BitMEX. You can watch for rates crossing a threshold, or for rates that suddenly multiply. Either way the matches surface as they cross your condition, with the per-scan cooldown pacing the alerts.
- Is the market scanner free to use?
- Yes. The free plan includes every feature — the scanner, all 19 alert types, and delivery to email, Telegram, Discord, or webhook — with 5 active alerts and 10 notifications per day. Sign in with Google to start; there's no card to enter and no exchange API keys to connect.
More ways to watch the market
All features →- 01Price alerts— When a coin hits a price you set
- 02Percentage moves— A big jump or drop within a time window
- 03Momentum alerts— Every time a coin swings by your amount
- 04Pump & dump alerts— The instant a coin pumps or dumps abnormally fast
- 05Wick detection— Spikes that get rejected and snap back
- 06Volume spikes— When trading suddenly jumps
Set your first alert in under a minute.
Free plan · No card required · Google sign-in